|Description: 12vdc L.E.D. Ribbon (tape) for Ourdoor use by the foot
The outdoor ribbon finishes nicely for exposed interior work as well. The encasement material does affect the light output slightly, but also offers an easier to clean smooth surface. Still plenty of light for coves or accents....
This is available in White and Warm White(Other Colors May be Special ordered in 5m (~16') increments) We are offer full reels at 10m (~32') which is consequently the maximum linear distance you can run from one feed.
Spec's Based on 5m (~16.2ft)
- 24watts (~1.5 - 1.7 watts per foot)
- Lumen White - 530 / Warm White - 400
- Color Temp.: White - ~ 6000k / Warm White ~ 3500k
- Dimensions: Width 8mm Height 2mm (less than 3/8" x 1/8")
- Cuttable every 3 LED's or 50mm (~ 2")
- Dimmable (Requires Dimmable Driver)
- 3M - Self Adhesive strip attached
Soldering Required to connect to ribbon / tape.
For outdoor use it is required to seal ends with epoxy or silicone (not supplied - epoxy preferred).
Requires DC power supply or LED Driver, see below for recommendations.
Fits well in Seagull Track Cover 9439-15 or -12 or the base off Wiremold 400BAC for added protection or installation on un-even substrates.
We've been selling this with some great results and many happy customers for about a year now, and I have yet to see a manufacturer defect.
Please visit this link to see a great example of how this was used in a cove project for one of our customers.
Discount applied automatically to cart for reel quantities (32')
Lengths are nominal and cut to the nearest foot. Cut marks at 50mm intervals. If you would like specific cuts please order them individually
We're offering a one year warranty based on 3 LED segments (2"), Life expectancy is about 50,000hrs but could be more or less depending on use, environment, operating voltage and protection.